E1 to V.35 Interface Converter

Name Interface Converter Spec ZS-C8-FE1/ V.35 Converter Remark Frame E1 to V.35 Converter Type Interface Converter

Interface Converter Series

                                                                                                                               ----- FE1 to V.35   Order InformationZS-C8-FE1/V.35       FE1 to V.35 (Frame, Transparent bridge mode and N*64K ) ---------------------------------------------------------------------------------------------------------------------Product model: ZS-C8-FE1/V.35Product DescriptionZS-C8 Series FE1/V.35 Protocol Converter provide conversion between ITU-T G.703 standard E1 interface and standard V.35/V.24 interface, can convert E1 channel of SDH, PDH, and other Optical Transmission Equipment or microwave, satellite Equipment to V.35/V.24 channel, Extend V.35 channel of DDN. Used widely in data communication networks, Connecting with V.35/V.24 interface of Routers and Optical Transmission Equipments without G.703 interface, realize match between different network equipments, and transparent to upper protocol layer. Technology Characteristics -> Bandwidth range is 64Kbps-2048Kbps Realize data of V.35 transparent transport in the E1-> Support all kinds of loop function, for testing and opening conveniently-> Support network function, monitor operation condition of facilities-> Support E1 interface of unbalance 75Ω and balance 120Ω-> Be possession of testing function of E1 Interface ParametersE1 Interface:   -> Support ITU-T G.703 , G.704   -> HDB3 line coding, comply indication output of route warn   -> Coding rate : 2048Kbps±50ppm   -> 75Ω physics interface use BNC standard coaxial connector, 120Ω physics interface use RJ45 connectorV.35 Interface: -> Interface Mode : DCE  -> Interface Type : DB25  -> Rate : 64Kbps-2048Kbps  Typical application

General characteristics

-> Power : 220V±20% , -36 ~ -72V-> Power Consumption : < 5W-> Environment Temperature : 0°C-50°C-> Size : 220×165×35mm-> Net Weight : 900gPacking List-> FE1/V.35 Protocol Converter-> One Power cord (Note : -48v no with power cord)-> Two BNCs Coaxial Connector-> One conversion cable of DB25-M34-> Manual book

E1 to V.35 Interface Converter